These units are designed for collar attachment to birds such as parrots or macaws with strong aggressive bills. These units can also be used on small & medium sized mammals who require a stronger transmitter casing than our normal epoxy coating.
Specifications
Model | Weight | Standard Life | Lifespan range | Dimensions: L x Diameter (mm) |
---|---|---|---|---|
AI-2C | 20g | 24 months | 12-30 months | 40 x 15 |
AI-2C | 32g | 36 months | 24-60 months | 46 x 17 |
Frequency Range: 138 – 235 MHz.
Transmitter: Crystal controlled two-stage design pulsed by a CMOS multivibrator.
Pulse Width (standard): 24 milliseconds.
Pulse Rate (standard): 40 pulses per minute (ppm). Available from 20-120ppm.
Power Output: Set to use available battery power over the required transmitter life.
Activation: Removing an external magnet starts the transmitter. Replacing the magnet stops the transmitter.
Housing: The battery and transmitter are hermetically sealed in a brass case.
Antenna: A flat brass strip forms the antenna and collar.
Options
Temperature (suffix “T”): An increase or decrease in temperature results in a corresponding increase or decrease in pulse rate. At the standard settings, the pulse rate changes from ~15 ppm at 0°C to ~40 ppm at 40°C. Each transmitter is supplied with a plotted calibration curve. This option adds ~0.05g to the finished weight of the transmitter.
Photos